|
Post by tubesforme on Nov 11, 2015 13:52:25 GMT -5
I am looking for a copy of the layout sheet or instruction manual for a Knight Kit built in about 1957. It used a small power transformer and a 6SN7GTB tube. It came with a 365 tuning capacitor as well as a pair of 2K headphones. It was a kit that contained fanstock clips as well various resistors and some capacitors and a volume control along with short pieces of various colored wires, stripped at the ends. I do have a lot of these parts yet, but not the original mounting board, which was a piece of dark stained plywood. I am missing several of the parts as well as the manual or layout sheet. I think it was called something like a 10 in 1 kit or along those lines. I was given this kit when I was 11 and loved it. however over the years and all the moves, I have lost what I need. Now in retirement I would one again like to try to get all of the components for this kit and maybe build something up. Would anyone know what I am talking about or have a copy of the manual or layout of the mounting board, for the parts? Thanks to everyone
|
|
alan
New Member
Posts: 1
|
Post by alan on Jan 1, 2016 17:49:17 GMT -5
The 10 in 1 kit had three tubes. I think that what you are looking for is information on the 6 in 1 kit. It had one tube, a 6SN7. The circuits that could be made were: 1) A standard (AM) broadcast receiver; 2) A wireless "Home Broadcaster"; 3) A code practice broadcaster; 4) A code practice oscillator for use with a headphone; 5) A signal tracer; and 6) a sine wave generator. I got this information out of an Allied Radio catalog for 1957. There are some collections of SAMS Photofacts on line, you may be able to find the instructions at one of these.
|
|